Case 1: Logistics & Warehouse Park Perimeter Security
Project type: Perimeter security for integrated logistics and warehouse park
Total fence length: 6400 m
Protected site area: 128000 ㎡
Fence height: 2100 mm, panel width: 2400 mm
Tube specification: Vertical bar 25×25×1.2 mm; horizontal rail 40×40×1.5 mm; standard post 60×60×2.0 mm; reinforced gate post 100×100×3.0 mm
Vertical bar spacing: 110 mm for anti‑climbing performance
Surface finish: Pre‑galvanized plus polyester powder coating, RAL9005 black
Installation: Concrete in‑ground post embedding
On‑site construction period: 31 days for full completion
Project pain points: Balance security and visibility, match industrial building appearance, resist truck collision damage
Project outcome: 500‑hour salt spray test passed, 10‑year manufacturer warranty. No rust or panel deformation within 3 years after completion, reduced on‑site security patrol workload
Case 2: Public Primary & Secondary School Boundary and Playground Separation
Project type: Campus perimeter and sports field isolation
Total fence length: 2280 m
Protected campus area: 46500 ㎡
Fence height: 1800 mm for outer boundary, 1500 mm for playground zone; panel width: 2000 mm
Tube specification: Vertical bar 19×19×1.1 mm; double horizontal rail 30×30×1.4 mm; post 50×50×1.8 mm
Vertical bar spacing: 100 mm to prevent child head entrapment
Surface finish: Hot‑dip galvanized plus powder coating, RAL7035 light grey
Project pain points: Anti‑entrapment safety requirement, burr‑free surface, campus‑friendly appearance, resistance against shaking and impact from students
Project outcome: Complies with campus safety standards, UV‑resistant coating, no repainting required within 8‑year service period
Case 3: Commercial Complex & Open‑air Car Park Enclosure
Project type: Commercial property perimeter and car park zoning isolation
Total fence length: 1720 m
Site coverage: 32000 ㎡ with total 1120 vehicle parking spaces
Fence height: 2000 mm for outer perimeter; 1200 mm for internal zoning partition
Tube specification: Vertical bar 20×20×1.2 mm; triple horizontal rail 35×35×1.5 mm; post 60×60×2.0 mm, base plate bolt down installation
Surface finish: Hot‑dip galvanized then powder coated, black colour
Construction period: 14 days, modular bolt assembly with zero on‑site welding
Project pain points: Located above underground garage roof, heavy concrete pouring forbidden; partial disassembly needed for future parking layout adjustment
Project outcome: Easy modular disassembly and reassembly. Single panel replacement takes less than 30 minutes for later renovation. Good resistance against urban acid rain environment, 10‑year product warranty
Case 4: Manufacturing Factory Site Boundary Fencing
Project type: Industrial plant covering production workshops, raw material yards and hazardous material zone separation
Total fence length: 3650 m
Total protected area: 72000 ㎡
Fence height: 2400 mm for main perimeter; 2100 mm for hazardous material partition zone
Tube specification: Vertical bar 25×25×1.5 mm; triple horizontal rail 40×40×1.8 mm; heavy‑duty post 80×80×2.5 mm
Vertical bar spacing: 100 mm
Surface finish: Hot‑dip galvanized plus outdoor polyester powder coating
Installation method: Mixed solution of base plate fixing and concrete embedding
Project pain points: High mechanical impact risk, dust and chemical fume corrosion from production area, strict zone division requirement
Project outcome: High structural rigidity against heavy impact. Coating performs well under industrial corrosive atmosphere. Less routine maintenance work for site management team
Case 5: Residential Community Perimeter and Backyard Partition
Project type: Housing estate outer boundary and private backyard separation
Total fence length: 1960 m
Fence height: 1800 mm for perimeter, 1200 mm for backyard dividers
Panel width: 2500 mm
Tube specification: Vertical bar 20×20×1.2 mm; double horizontal rail 30×30×1.4 mm; post 60×60×2.0 mm
