Steel Tubular Fence for UK and France: Specifications, Applications & Project Solutions

Steel tubular fencing combines security, durability and architectural appearance, making it suitable for residential developments, industrial facilities, commercial properties, schools and public areas.

In the UK and France, fencing projects often require a balance between perimeter security, corrosion resistance, appearance and compatibility with the surrounding architecture.

Bendin manufactures customizable steel tubular fence systems for international projects. Fence height, picket dimensions, rail sizes, post specifications, surface treatments, colors and gate systems can be manufactured according to confirmed project requirements.

What Is a Steel Tubular Fence?

A steel tubular fence is constructed from vertical steel pickets connected by horizontal rails and supported by steel posts.

Unlike welded wire mesh fencing, tubular fencing provides a more architectural appearance while maintaining a strong physical perimeter.

A complete system normally includes:

• Steel tubular fence panels
• Vertical pickets
• Horizontal rails
• Steel posts
• Post caps
• Fixing brackets
• Pedestrian gates
• Vehicle gates

Different picket tops, spacing, colors and panel designs can be selected according to the required security level and appearance.

Typical Steel Tubular Fence Specifications

Bendin can manufacture different tubular fence specifications according to project drawings.

These are typical manufacturing options. Final specifications should be determined according to project drawings, installation conditions and applicable local requirements.

Steel Tubular Fence for the UK

Steel tubular fencing is suitable for a wide range of UK projects, including:

• Residential developments
• Schools and public facilities
• Commercial properties
• Warehouses
• Industrial sites
• Utility facilities
• Parks and landscaped areas

Because fencing in the UK can be exposed to frequent rainfall and outdoor moisture, corrosion protection is an important purchasing consideration.

A galvanized steel substrate combined with powder coating can provide additional surface protection while offering a clean architectural finish.

Black tubular fencing is particularly suitable for projects where security needs to be combined with a traditional or understated appearance.

UK Standards and Project Requirements

For UK fencing projects, the applicable requirements depend on the type and intended use of the fence.

BS 1722 contains specifications for different types of fencing, but buyers should identify the section relevant to the actual fence design rather than assuming one part applies to every tubular fencing system.

Where structural hollow steel sections are used, material requirements may also reference relevant EN standards according to the project specification.

Bendin can manufacture tubular fence components according to confirmed drawings and purchasing specifications provided by the contractor or project buyer.

Steel Tubular Fence for France

In France, steel tubular fencing can be used for both functional perimeter protection and architectural boundary applications.

Typical applications include:

• Residential communities
• Commercial properties
• Industrial facilities
• Schools
• Public buildings
• Parks
• Logistics centers
• Municipal projects

For projects where appearance is important, tubular fencing can be customized with different picket profiles, tops and colors to coordinate with surrounding architecture.

Black, dark green and gray finishes are commonly suitable for modern and traditional environments.

Corrosion Protection for European Climates

Surface treatment is an important factor in the service life of outdoor steel fencing.

Bendin can provide different finishing options according to project requirements.

Galvanized Steel

Galvanizing provides a protective zinc layer that helps protect the underlying steel against corrosion.

Galvanized + Powder Coated

Combining galvanizing with powder coating provides corrosion protection together with a decorative finish.

This option is suitable for projects where both durability and appearance are important.

The required coating specification should be selected according to the installation environment, project requirements and expected exposure conditions.

Picket Designs and Security Options

Steel tubular fencing can be manufactured with different picket designs.

Flat-top pickets provide a simple and modern appearance suitable for commercial and residential projects.

Spear-top pickets create a more traditional appearance while providing a more defined perimeter.

Customized picket designs can also be manufactured according to architectural or project requirements.

Picket spacing, fence height and top design should be selected according to the intended application and applicable safety requirements.

Example UK Commercial Project Configuration

Consider a commercial property requiring approximately 300 meters of steel tubular fencing.

A preliminary specification could include:

Using 2.4-meter panels, approximately 125 panel sections would be required before allowing for gates, corners and site-specific adjustments.

This is an illustrative procurement example, not a claimed Bendin customer project.

Final quantities should be calculated from the actual site drawing.

Applications in Industrial and Commercial Projects

Steel tubular fencing can provide a practical perimeter solution for:

Industrial Facilities

Strong steel construction makes tubular fencing suitable for factories, warehouses and logistics facilities.

Residential Developments

Different heights, picket designs and colors allow the fence to complement residential architecture.

Schools and Public Areas

Open picket construction maintains visibility while defining the site perimeter.

Commercial Properties

Powder-coated tubular fencing provides a clean appearance suitable for offices, retail developments and commercial facilities.

Custom Steel Tubular Fence Manufacturing

Bendin can manufacture tubular fencing according to customer drawings and technical requirements.

Customization options include:

• Fence height
• Panel width
• Picket dimensions
• Picket spacing
• Rail dimensions
• Post dimensions
• Flat or spear tops
• Base plates
• Surface treatment
• Powder-coated colors
• Pedestrian gates
• Vehicle gates

For project orders, customers can provide CAD drawings, specifications or tender requirements before production.

What UK and French Buyers Should Check

When comparing steel tubular fence quotations, buyers should consider the complete specification rather than only the price per panel.

Important factors include:

Steel dimensions: Compare picket, rail and post dimensions.

Wall thickness: Similar external tube dimensions can contain different quantities of steel.

Surface treatment: Confirm the galvanizing and coating specification required by the project.

Panel design: Check picket spacing, rail quantity and overall panel construction.

Gates: Confirm gate dimensions, posts, hinges and locking requirements.

Installation: Determine whether posts will be embedded or installed using base plates.

Providing these details helps ensure quotations from different manufacturers are based on comparable specifications.

Quality Control and Export Packaging

For UK and French project orders, Bendin can inspect key production characteristics including:

• Panel dimensions
• Picket spacing
• Tube dimensions
• Welding quality
• Post dimensions
• Surface finish
• Gate dimensions
• Accessory compatibility
• Packaging

Fence panels, posts, gates and accessories can be packaged separately for international transportation.

Why Choose Bendin?

Bendin manufactures steel fencing systems for residential, commercial, industrial and infrastructure projects.

Our steel tubular fence capabilities include:

• Multiple panel dimensions
• Customized picket designs
• Multiple post systems
• Galvanized finishes
• Powder-coated finishes
• Pedestrian and vehicle gates
• Manufacturing according to drawings
• Export packaging
• Container loading support

Specifications can be confirmed according to the project requirements before mass production.

Frequently Asked Questions

Is steel tubular fencing suitable for the UK climate?

Yes. Appropriate galvanizing and coating systems can be selected for outdoor environments where corrosion protection is required.

Can Bendin manufacture fencing for French projects?

Yes. Fence dimensions, picket designs, colors, posts and gates can be customized according to confirmed French project specifications.

What is the typical height of a tubular fence?

Common heights range from approximately 1.0 to 2.4 meters, although customized heights are available.

Which is better: flat-top or spear-top fencing?

It depends on the application. Flat-top fencing offers a simple architectural appearance, while spear-top designs provide a more traditional and security-oriented appearance.

Can Bendin supply matching gates?

Yes. Pedestrian and vehicle gates can be manufactured to match the fence design and project dimensions.

Request a Steel Tubular Fence Quote

Bendin supplies customizable steel tubular fencing for UK and French residential, commercial, industrial and public projects.

For an accurate quotation, provide:

Fence height + panel width + picket size + rail size + post size + surface treatment + color + quantity + gates + destination.

Bendin can manufacture fence panels, posts, gates and accessories according to confirmed project specifications.